Flocculant / Decanter, FLOKANT from 1L to 50L 1.0 kg

• Your totally transparent and shiny pool.
• It binds a large amount of particles and due to their weight they will descend to the floor of the pool so that they can be removed by sucking all that dirt directly into the drain.

INDICATIONS OF USE:

• Slightly cloudy water: Apply 70 to 100 ml of Flokant per 10,000 liters of water.
• Medium cloudy water: Apply 80 to 150 ml of Flokant per 10,000 liters of water.
• Completely cloudy water (without seeing the bottom): Apply 100 to 200 ml of Flokant per 10,000 liters of water.

1. Adjust the pH above 8.0 for best results.
2. Apply Flokant (once the sun has gone down, if you are outdoors) by dissolving the product in a bucket of water or directly from the can, distributing it evenly around the entire pool and helping it to dissolve in the water with a spoon. maintenance.
3. With the filter pump turned off, place the filter handle on “Circulation” (Whirlpool) so that the Flokant is evenly distributed (without passing through the sand). Note: If you use a cartridge filter, Flokant should not be circulated through it (continue to step 5).
4. Turn on the motor pump for 30 to 60 minutes and turn it off.
5. Let sit for about 3 to 6 hours.
6. Vacuum pool carefully to drain.
7. Make sure you have the filter handle on “Filter” and leave it operating at its normal schedule.
8. Adjust the pH to its ideal level (7.4 to 7.6) with “Acik” or “Alkant” and superchlorine with “Clorant2 Shock”.